Ultracut FBS II – US TX – Concrete Screw, Hex Head/Torx (NOGO RJ)

The high-performance concrete screw for easy installation.

Ultracut provides the best possible flexibility in load and fixture thickness with up to three permitted screw-in depths. The specialized saw tooth geometry allows it to cut quickly into the concrete. No drill hole cleaning is required for mounting in ceilings or floors or when using hollow drill bits with suction. The anchoring is free from expansion pressure (undercut), ensuring the lowest possible axial spacing and edge spacing. ETA approval covers application in cracked concrete, as well as seismic performance categories C1 and C2. Adjustments conforming to the approval makes it possible to loosen the concrete screws 2x, to place mate- rials under and/or align the anchor base plate. National approval regulates multiple uses for temporary anchoring (e.g. formwork construction).

The FBS A4 ensures very high loads, thus resulting in fewer anchoring points. The enhanced stainless steel version A4 now also allows anchoring applications in outdoor and damp areas. The version type CSK (countersunk head) offers expanded use for applications with challenging designs. The ETA approval Option 1 governs the use of single-point fixings in cracked and non-cracked concrete.

         
DOWNLOAD PDF – ETA-Approval-15-0352-Fischer-Ultracut-FBS II (4,1 MB)
DOWNLOAD PDF – Technical Data Sheet – Ultracut-FBS II (0,25 MB)

 

Category: SKU: 536851-NOGO Tags:

Description

ADVANTAGES

  • Ultracut provides the best possible flexibility in load and fixture thickness with up to three permitted screw-in depths.
  • The specialized saw tooth geometry allows it to cut quickly into the concrete.
  • No drill hole cleaning is required for mounting in ceilings or floors or when using hollow drill bits with suction.
  • The anchoring is free from expansion pressure (undercut), ensuring the low- est possible axial spacing and edge spacing.
  • ETA approval covers application in cracked concrete, as well as seismic performance categories C1 and C2.
  • Adjustments conforming to the approval makes it possible to loosen the concrete screws 2x, to place mate- rials under and/or align the anchor base plate.
  • National approval regulates multiple uses for temporary anchoring (e.g. formwork construction).

 

APPLICATIONS FUNCTIONING Guard rails

  • Guard railsConsoles/base plates
  • Consoles/base platesMetal profiles
  • Metal profilesShelving systems
  • Shelving systemsProtection barriers
  • Protection barriersResults / beam anchors
  • Results / beam anchorsTemporary anchoring, e.g. of building
  • Temporary anchoring, e.g. of building site equipment
  • Formwork

 

FUNCTIONING

  • The ULTRACUT FBS II is suitable for push-through installation.
  • When installing in ceilings and floors, no drill hole cleaning is required. For drill holes in the floor, the user must drill down 3x deeper than the drill hole diameter.
  • It is installed using a torque wrench with a socket suited for this type of wrench, or a special Torx bit.

Related products